INNLOI V1330 1330mm Hexacopter Foldable Drone Carbon Fiber Folding Heavy Load Frame For X6 Plus Motor 2480 FOC Propulsion System-Agriculture spraying UAV

ꁆ ꁇ

ꁸ Top
88888888
ꁗ QQ service
Wechat

Overview

Picture packing list:
(Ready-to-Fly status)
(Not Include the Li Battery and Lipo Battery Charger)
V1330 Hexa Folding Drone: 1set

NO.1 Detail list:
(Ready-to-Fly status)
(Not Include the Li Battery and Lipo Battery Charger)
V1330 Hexa Folding Frame: 1set
ø 18mm Landing gear :1set
12S X6 Plus Propulsion System: 6set
EZ-9 Flight Controller+GPS: 1set
G10A Drone Ground Control Station: 1set

Product use precautions
- Please comply with local regulations and do not fly in the no-fly zone.
- Flight is prohibited within 8km from the airport.
- It is forbidden to fly above people, houses or vehicles.
- Do not fly in rain, strong winds or fog.
- It is forbidden to fly above the venue.

Troubleshooting Guide
The aircraft tilts severely upon takeoff or flips over upon takeoff:
This means that it is usually caused by installation or setup, and the following

points can be checked:
Check if the rack setting X or+is correct
Check if the ESC electrical adjustment number is correct
Is the motor turning correctly
Is the direction of the propeller correct, and is the wind blowing downwards
Is the accelerometer calibration correct
Is the ESC electric throttle synchronized

The drone motor cannot take off or the unlocking motor cannot rotate:
Check if the wind blows downwards (incorrect installation of the propeller and incorrect rotation of the motor)
Insufficient power? Check if the propeller size and battery voltage match in the motor parameters
The motor is not responding and keeps beeping: the remote control throttle stroke is not calibrated
The aircraft is controlled to fly forward, actually to fly backward or to fly left, actually to fly right:
The control channel of the remote control is reversed. Adjust the corresponding channel of the remote control menu to reverse it once

Flight control cannot detect remote control signal:
If it is the first use:
First, check if the receiver has successfully paired?
Is the receiver output in PPM or SBUS protocol? If not, please use a PPM encoder

If it was normal before but suddenly stopped working:
Is it possible that the receiver is malfunctioning or the flight control IO is malfunctioning?

*Note: The manual is subject to change without prior notice.

Official Store

Youtube video

Shenzhen GC Electronics Co., Ltd.

Address:502, Building A2, Yinfeng Industrial Zone, Hangcheng Avenue, Hangcheng Street, Baoan District, Shenzhen

Post code:518112

Email:Innouav@outlook.com

Skype:Innouav@outlook.com

Wechat /Whatsapp ID:18929322637

Phone86 13652400311

Related Products

innouav@outlook.com

ꁸ Top
13652400311
ꁗ QQ service
Wechat:

끸

Verification code

Submit

Price：

$ 0.00

Quantity： ꄷ ꄸ